Achieve A Match Quality Barrel Installation Using Only Hand Tools
The KART XACT FIT BARREL allows the average person to install this barrel themselves. Installed correctly it will attain match grade accuracy and absolute reliability. XACT FIT barrels are sold with a pre-fit link and bushing.
Install a precision quality barrel using just four small hand tools. The only fitting required is to adjust lockup with the two raised pads located on either side of the rear locking groove, cut the barrel hood to correct length and fit the bushing to the slide. A national match bushing is pre-fit to the barrel, has oversize O.D. for precise fitting to slide. Bottom lugs are fully finished and the correct length link installed to save hours of work
SPECS: 4150 ordnance steel, in-the-white. Available in 5″ (12.7cm), 6″ (15.2cm), or Commander 4.25” (10.8cm) lengths. (N/R) Non-ramped. (W/N) Wilson/Nowlin ramp. (C/P) Clark/Para ramp. Ramped barrels require machining of frame. Requires gunsmith fitting. Includes instructions.